|
Detail
|
|
Composed of :
A - VOLUMETRIC FILLING UNIT
- volumetric doser with capacity from 5cc up to 1.500cc
- 3-way rotary pneumatic valve
- 2-way pneumatic valve with anti-drip nozzle
B - CAPPING UNITS
- pneumatic motor and stainless steel spindle
WORKING CYCLE
- Manually place the bag on the support fork for the doypack bag
- Set the amount of product to be dispensed using the handwheel located below the workstation
- The suction speed and the dosing speed of the product can also be adjusted according to the specific needs of the user and the product to be dosed.
- By manually moving the lever, the filling valve moves into the working position
- Start the filling cycle using a push-button
- Activate nitrogen injection preting (optional). The nitrogen injection time and nitrogen flow rate are adjustable both through a pressure regulator and a delay.
- Place the cap on the spout manually
- By manually moving the lever, position the locking head in the capping position
- Starting the capping cycle by means of a push-button
TECHNICAL SPECIFICATIONS :
- Machine body with stainless steel base on wheels
- Volumetric stainless steel dosing syringe with control knob the quantity of product to be dispensed with viewer references
- Doypack bag neck support fork, made of stainless steel and specific for a bag format. Manual placement.
- Specific piping for foodstuffs
- Stainless steel rubber holder for direct connection to the storage tank or hopper (optional)
- Manual adjustment of working height
- Capping unit consisting of a pneumatic motor and a stainless steel spindle and made according to the specifications of the cap, for the closure of a plastic screw cap format
- Torque for adjustable cap closure
- Dimensions: 500 x 770 x 1400 mm
- Productivity: up to 400 pieces/h (from 250ml)
- Supply: compressed air 2 - 6 bar
- Air consumption: 250 Nl/min
|
|