Beverage
Machines
Food
Machines
Used Machines Advice Info Sèlectionner Votre Langue  Cambia Lingua
  ! Policy Privacy
 

WALL OR CENTRAL ASPIRING HOOD



wall or central aspiring hood
 
 

Aspiring hoods entirely made of stainless steel and available in different sizes, are ideal for all environments where there is a cooking zone, a processing laboratory for fruits and vegetables, a restaurant, a canteen or a gastronomy laboratory.

The main function of the apsiring hood is to inhale and eliminate smokes, smells and steams that the food releases while cooking.

 
 

 
 

  CHARACTERISTIC :  
 
Aspirazione Cappa Aspirazione Cappa
Central hood Profile Aspiring wall hood Profile
wall hood plan profile Speed electronic controller

Detail

 



Aspiring wall Hood
Available in two versions: angled or flat outline.

  • Made in AISI 304 stainless steel brushed scotch-brite
  • Equipped of chains, hooks and tensioners for fastening
  • Centrifugal aspirator of 220 Volts, 184 watt, IP54
  • Perimeter duct complete with condensation drain and discharge tap
  • 2 or 3 labyrinth filters of mm. 400x400 and extractable spacers in AISI 304 stainless steel
  • Squared output section 250x250 with threaded inserts M6
Angled Profile Measures mm.:
  • PxLxH: 700x1200x430h (m3/h.1100)
  • PxLxH: 700x1600x430h (m3/h.1100)
  • PxLxH: 900x1200x430h (m3/h.1600)
  • PxLxH: 900x1600x430h (m3/h.1800)
  • PxLxH: 1100x1200x430h (m3/h.1600)
  • PxLxH: 1100x1600x430h (m3/h.1600)
N.B. bigger hoods are available as well (P x L x H) mm.: fino a 1100x3000x430h


Flat Profile Measures mm.:
  • PxLxH: 900x1200x430h (m3/h.1400)
  • PxLxH: 900x1600x430h (m3/h.1400)
  • PxLxH: 1100x1200x430h (m3/h.1400)
  • PxLxH: 1100x1600x430h (m3/h.1400)
  • PxLxH: 1400x1200x430h (m3/h.1400)
  • PxLxH: 1400x1600x430h (m3/h.1400)
N.B. bigger hoods are available as well (P x L x H) mm.: fino a 1400x3000x430h


Aspiring central Hoods

Provided with 400x400 stainless steel labyrinth filters on both sides, ceiling or wall fixing accessories, and equipped with a perimeter duct with drain, which collects condensate of both the filters and the hood itself.

  • Made in AISI 304 stainless steel brushed scotch-brite
  • Equipped of chains, hooks and tensioners for fastening
  • Centrifugal aspirator of 220 Volts, 184 watt, IP54/li>
  • Perimeter duct complete with condensation drain and discharge tap
  • 4 or 6 or 8 labyrinth filters of mm. 400x400 and extractable spacers in AISI 304 stainless steel
  • Squared output section 300x300 with threaded inserts M6
Measures mm.:
  • PxLxH: 1200x1200x430h (m3/h.1600)
  • PxLxH: 1200x1600x430h (m3/h.1800)
  • PxLxH: 1500x1600x430h (m3/h.2000)
  • PxLxH: 1500x2000x430h (m3/h.2600)
N.B. Bigger hoods are available as well (P x L x H) mm: Until 1500x3000x430h

Accessories :
  • Watertight neon lamp protection IP65
  • Watertight lamp 60W of mm 1600 - Protection IP65
  • Watertight lamp 40W of mm 1300 - Protection IP65
  • Watertight lamp 20W of mm 650 - Protection IP65

  • Speed electronic controller
  • Protection IP 55
    Nominal power 2300 Watt - 10A
    Microprocessor control circuit

 

  info durfo Request info on this product >>